Towing hitch for Audi A4 sedan 00- Oris swan neck + Wiring harness with 13 pins TOP

  

COMPLETE KIT for Audi A4 sedan 11.2000 - 10.2004, consisting of an Oris swan neck tow bar and a universal 13-pin trail-tec wiring harness. Other important product information can be found in the installation manual - please click on the link! Technical support even after purchase. A complete kit: Tow bars + harnesses.

Tow bar kit for Audi A4 sedan - consisting of. Tow bar: swan neck and Electrical harnesses: universal 13-pin.

Year of: 11.2000 - 10.2004. Type approved according to 94/20/EC/ECE-R-55. Swan neck detachable with tool.

Not compatible with S4 models. All necessary screws and fixing parts are included in the delivery. General Operating Approval (ABE) and ECE - Product Certification (Homologation).

Trailer hitches already homologated according to ECE regulation 55 or previously 94/20/E have already been tested according to European standards. They comply with CE directives, are tested and approved for the French market. It is not necessary to have the tow bar approved by an expert or inspector after installation or to have it registered on the vehicle papers. Transportsysteme24 GmbH is the authorized official partner of the Oris / ACPS brand. What is the towable mass?

The towable mass defines the maximum total weight allowed, with which a vehicle equipped with a suitable tow bar can tow a trailer. Depending on the type and version of the vehicle (engine power), this may vary. You can find the maximum allowed trailer load for your vehicle on your registration document.

Where can I find this entry in the vehicle documents? Depending on the age of the vehicle, you will find the value in the vehicle registration document. Take the value from area F.

3 and subtract it from the value from area F. In order to calculate the maximum towable mass allowed for the vehicle. In exceptional cases, this value can be increased by calculation. Respect the information on the vehicle registration document - especially for incline indications.

For the tow bars we offer, you will find the maximum allowed trailer load of the trailer hitch in the technical data of the product view. Important: If the maximum towing load value of the vehicle and the trailer hitch are not identical, the lower value always applies. Example: If the maximum allowed trailer load of 1,500 kg is indicated in the vehicle document, but the associated trailer hitch has a tested trailer load of 1,800 kg, only 1,500 kg can still be towed. Under certain conditions, an increase in the trailer load can be requested for the vehicle.

This requires approval from the respective vehicle manufacturer, for example Audi, BMW, Mercedes... The vehicle must then be presented to an expert. With the test certificate you receive from them, you can have the change registered in your vehicle documents at the registration office.

The authorized trailer load in kilograms can be determined as follows: Formula for calculating value D: (Total weight Towable mass 9.81) / (Total weight + Towing capacity) Towable mass calculation formula: (value D total weight) / (total weight 9.81 - value D) Total weight calculation formula: (value D trailer load) / (trailer load 9.81 - value D) Static mass calculation formula according to the 4% rule: Towable mass 0.04 GF = (authorized total weight of the vehicle in kg) see vehicle registration D = (value D in kN) see tow bar nameplate/mounting instructions. What is a bumper cutout? When cutting the bumper, a piece of the bumper is cut out on the rear part of the vehicle.

It is important to note that there are bumper cutouts in the visible area and in the non-visible area. This depends individually on the design of the bumper. Trailer hitch manufacturers always strive to avoid bumper cutouts. If this is not possible, the cutout is limited to the bare minimum.

If the bumper needs to be modified, you can always find it in the respective installation instructions of the article. If a cutout is necessary, you will also find the dimensions or a template defining the size of the desired cutout. Tip: For cutting, use a jigsaw with a fine saw blade, as it allows you to work on plastic very easily and especially with precision. To make the cutting edges smooth again, you can carefully heat them with a lighter. Professionals can also do this with a bunsen burner or a "Blue-Fire". But keep enough distance to be able to shape perfectly.

What is the static mass? The maximum weight that can be applied vertically from above on the trailer hitch ball.

The authorized vertical load of the vehicle is found in the vehicle manual under "trailer use". The maximum static load of each tow bar device is indicated on the approval plate and in the installation instructions.

Tip: If you want to mount a rear bike carrier with an electric bike on your tow bar, you must absolutely pay attention to a high static load. Important: What if the vertical load values between the vehicle and the trailer hitch are not identical?

Example: If the manufacturer has authorized a maximum vertical load of 75 kg for the vehicle and the trailer hitch has an approved vertical load of 60 kg, the value of the trailer hitch is decisive. In this example, it would be 60 kg. In this case, the lower value always applies.

This value of a trailer hitch is expressed in Kilo-Newton and serves as a basis for calculating the permissible trailer load. The value D is determined and verified once and remains unchanged. Only the value D and the allowed vertical load are indicated on the trailer hitch approval plate.

The indication of value D allows determining the bandwidth during a modification reception according to § 19 (3) StVZO (German road traffic regulations). For example, it is possible to modify the authorized total weight by varying the towed load accordingly, without a new inspection. The required value D according to directive 94/20/EC can be determined as follows: GF = (authorized total weight of the vehicle in kg) see vehicle registration GA = (authorized trailer load of the vehicle in kg) see vehicle registration. What is a foldable socket holder?

The socket is mounted on a support plate with a hinge and can be folded under the bumper. It is not mandatory, but simply an improvement in appearance. Many detachable and swivel tow bars are equipped with retractable sockets. We even have some rigid tow bars with this feature in our range. Info: The construction of a tow bar device with a foldable socket holder depends on the presence of sufficient space between the tow bar cross tube and the rear part of the vehicle.

Almost all trailer hitches in our assortment have an approval plate and are therefore checked according to directive "94/20". Such a tow bar can be used on public roads without further inspection.

According to Article 27, paragraph 1 of the StVZO (German road traffic regulations), a tow bar retrofitted with an approval plate must only be added during the "next vehicle registration document consultation" at the registration office. However, according to clause 1a, any possible modification of the authorized towable load resulting from the installation of the tow bar device must be reported immediately. After installing a tow bar that requires an individual inspection at the technical inspection, we provide a certificate, with which you must have an individual inspection carried out after installation. You will receive a document with which you must have an immediate entry made on your vehicle papers at the registration office.

National brand (M, F, N). The same terms as for the individual technical inspection procedure apply here. The only difference is that these trailer hitches have a permanently assigned approval certification.

Info: A tow bar device tested according to EC94/20 meets the following criteria: - the trailer hitch has a valid approval plate with all necessary data - the distance between the tow ball and the bumper and the road complies with regulations. The construction has passed the endurance test with 2 million load changes. All prescribed fastening points by the vehicle manufacturer have been respected.

Important: The installation instructions must be attached to the vehicle papers and must be in the vehicle! What is the installation time? The installation time of a tow bar is indicated by the tow bar manufacturer itself.

This time is limited exclusively to the installation of the product. This time does not take into account, for example, the installation or fitting of the bumper. Tips To avoid calculation errors, calculate the specified indicative values with a factor of two.

Experience shows that this comes closest to the actual installation time. What is a socket support plate? The socket, whether 7 or 13 poles, is always attached to the socket support plate with 3 screws. Some trailer hitches are even equipped with a folding function. What is an approval plate? Each tow bar device must be equipped with an approval plate to not invalidate the vehicle's circulation authorization. An approval plate must contain the following information: - Tow ball diameter - Approval number - Serial or manufacturing data - Static mass kg - Value D in kN - Type Info: Do not hesitate to ask us for the corresponding document. Not compatible with bike carriers. No deactivation of the rear fog light is possible. In Germany, the trailer monitoring unit is mandatory for trailers.

If you wish to order an electrical kit with a monitoring unit, please contact us before purchasing. More permanently integrated, pin 9.

Connection to the trailer socket. The socket allows you to connect to the trailer plug and ensures electrical connection between the car and the trailer. What does 7 pins mean?

A simple connection that is sufficient to meet legal requirements. Like all 7-pin harnesses, special functions such as permanent power supply or reverse lights (on the trailer) are not possible. What does 13 pins mean? This is a waterproof connector with simple handling.

Meanwhile, this variant has become the standard for original equipment. Signaling functions and permanent power supply or reverse lights can be transmitted without any problems. Additional free pins are also available and offer useful options, especially in camping. What is an original connector?

The connections between the vehicle and the electrical kit are made using existing connectors, which excludes any connection errors. What is a diagnosis tool necessary? Modern electrical kits are equipped with trailer control modules capable of exchanging data with the vehicle control units. Some functions, such as deactivation of reverse sensors, trailer stability, and deactivation of rear fog lights, only work when both computers have learned to communicate with each other.

It is therefore necessary to perform corresponding coding on the vehicle using a diagnostic tester. The current driving situation of the car is monitored by sensors installed on the vehicle. Once the trailer plug is connected, the vehicle recognizes the "trailer" operating mode and monitors all dynamic movements of the vehicle.

If the trailer is in a critical state, the vehicle's onboard computer assists the driver in regaining control of the situation. Info: - TSP, Trailer-Stability-Program - TSM, Trailer-Sway-Mitigation - TSA, Trailer-Stability-Assist Technical note: Trailer stability only works if an electrical kit assists it.

To do this, the electrical kit must be registered in the vehicle's data bus system through activation. Vehicles that do not have TSP as standard cannot be equipped with this function using an electrical kit compatible with TSP. What is a universal harness?

A universal electrical kit is suitable for different brands and types of vehicles, but is not specific to any particular model. Characteristic features: - Connection is made to the power wires. The functions of each wire must be identified. The wiring must be shortened or lengthened if necessary.

The installation instructions do not refer to vehicle-specific characteristics. Tip: If possible, always buy a vehicle-specific electrical kit, as assembly errors are almost excluded. What is a specific harness? A specific electrical harness has been specially developed for a particular vehicle. Before marketing a specific electrical kit, a test installation is performed on the specific vehicle to ensure proper operation.

Typical features: - pre-designed connectors - precisely tailored cable lengths - installation instructions describe all necessary work steps in text or pictograms for correct assembly. Info: There are vehicle-specific electrical kits that also fit several vehicle models, as vehicles are often built on the same platform, regardless of the manufacturer! Tip: Specific electrical kits save assembly time and therefore money.

What does pre-assembled socket mean? One end of the cable harness is already connected to the socket.

This facilitates installation and saves valuable installation time. What is a socket with screw terminals? The socket insert has connection locations for attaching the wires, which make contact using a screw terminal. What is a socket with crimp terminals? In the case of a crimp socket, the wires are already installed in the contact carrier. This results in a gas-tight compression of the cable with the contact plug, ensuring an optimal contact connection. What is rear fog light deactivation? When deactivating the fog light system, the rear fog lights of the towing vehicle are turned off.

Regardless of whether the trailer has its own fog light system. Note: When using a rear bike carrier with its own lighting units, it is mandatory for the rear fog light of the car to be deactivated (in Germany). The CAN data bus technology (also known as Controller-Area-Network) is the technical term for a special type of data transmission in a vehicle. It manages the electronic network of a modern car and connects most control devices.

Info: A modern car contains up to 70 control units for exchanging data between them, which then enable the most suitable functions. It is a bulb failure check that indicates to the driver, on the dashboard, through a visual symbol, a defective lighting such as indicators, brake lights, etc. What is a Flasher Relay or Turn Signal Relay? Flasher relays are also called turn signal relays and are responsible for transmitting the flashing impulse to the turn signals of the vehicle or, if applicable, the trailer. In case of malfunction, the flashing frequency changes. What is a trailer module? The trailer module partially or completely regulates the lighting of the trailer. The impulse usually comes from the rear lights of the vehicle, which the control unit transmits to the trailer. What is a trailer detection? A trailer detection function indicates to the towing vehicle if a trailer or bike carrier is attached.

This is often done via a microswitch integrated into the power socket. What is a C2 light? The C2 light is an additional green light.

It must be placed on the dashboard, within the driver's field of vision. Info: On certain types of vehicles, a C2 light is already equipped to be controlled by the flasher relay. Practical: In trailer mode, the C2 light flashes at the same time as the standard turn signal light. Even without a trailer, it can flash up to three times, but then it must go out!

What is a wiring diagram? In the wiring diagram of a 7 or 13-pole socket, it is defined which cable occupies which contact of the socket. Cable identification is done by colors.

The socket contacts are identified by numbers and letters. A microswitch is a small electrical switch integrated into the electrical kit's power socket. It can be used for different functions such as deactivation of the EPH, trailer detection, etc. What is a central connector?

Some vehicles are already prepared to receive a "factory electrical kit". In such cases, there is one or more central connectors, which are ready to serve as a connection point for the trailer cable set. What is a permanent power supply?

The additional permanent power supply is a continuous 12Volt voltage that ensures a permanent current flow to contact "no. 9" and is only possible for 13-pin trailer sockets according to DIN/ISO 11446. What is a charging cable? A battery in the trailer can be charged with a charging cable while driving.

This works via contact "no. 10", a 13-pin socket according to DIN/ISO 11446. As soon as the contact is interrupted, the power supply is cut off by a cut-off relay.

More offers for this type of trailer hitch. We distribute items from the following manufacturers. Even more reasons to order from TS24.

Our experienced staff will be happy to advise you. All orders are processed and prepared for shipping within one business day. At Transportsysteme24, you only buy brand products from proven manufacturers. Our goods are delivered with the corresponding control certificate and authorization according to road regulations.

A wide range of products. We have a large stock. Note: The logos of car types/ manufacturers are solely for better defining the offered product/ compatibility (according to European legislation) and belong to their legal owner.